The major air conditioner repairs carried out are as a result of air conditioner not being able to start, or the cooling capacity has been reduced, the venting is lost or it can be as a result of internal the different parts of the air conditioner.
The typical air conditioner components that have to be replaced will be the faulty air compressor or condenser, defective air handling unit, defects in the duct system and the air leaks.
If your air conditioner doesn’t start, you’ve to consider the controls and the switches as a lot of the problems are electrical related. You have to check on perhaps the circuit breaker and the thermostat are properly functioning.
After that you might want to check on the air handling unit which comprises the return air plenum, air filter, blower fan, cooling and heating coil and the supply plenum heating and air columbia sc. Next you need to check on the circuit breakers for the compressors and the air handling units.
If the air-con problem is not resolved, you then need to check on the duct system i.e. the return air ducts and the supply air ducts and the filters if they carry air from the air handler to different intended rooms in the building.
One other most typical problem with air conditioners will be that the air conditioner doesn’t give good cooling effect. It so, you will need to check the blower unit.
If you find that it’s dirty, you should clean it as it causes loss in cool air supply. The reduced cooling could also be as a result of old or aged air compressors which need to be replaced.
The air compressors are costly and this might be a costly repair. Cooling effect is reduced even when the condensate from the air conditioner is not being drained properly or you can find leaks in the air handler, or as a result of damaged air ducts or as a result of problems in the air conditioner refrigerant system.